Pneumatic knife gate valve manufacturer in India

 

Specialityvalve is the foremost Pneumatic Knife Gate Valve Manufacturer in India. The pneumatic knife gate valve is similar in design to gate valves. These valves cut through thick, porous media that may contain a high concentration of suspended solids which had caused problems with valves not seating completely and thus leaking.

Knife gate valves are a specific type of isolation valve which is typically used for media that are not hazardous such as wastewater. The bore of a knife gate valve is fully smooth, so the use of a cleaning pig for maintenance is possible. A thin stainless-steel gate is raised and lowered into the bore by a spindle or rising screw and unlike other gate valves lifts outside the valve body when raised.

 Gate Valve is a valve that opens by lifting a barrier out of a path of a fluid. It is designed with a fully open or closed service. Operation of a gate valve is performed either clockwise to open or clockwise to close. The gate moves up or down on the threaded part of the stem. Gate valves should not be used for regulation or throttling of flow because exact control is not possible.

They are designed to limit or stop the movement of a liquid in a flowing stream but there is a myriad of designs and applications that depend on the specific use case. The open or closed state of the valve can be observed from the position of the gate- if it is visible above the valve body then it is open also if it is not visible then the valve is closed.

Specialityvalve is a well-known Pneumatic Knife Gate Valve Manufacturer in India which is famous for their premium quality products which come in various materials and designs. All their products are tested according to requirements and standards.

 

Advantages of Pneumatic Knife Gate Valve

·      Easy to actuate by mechanical, electrical

·      Lightweight

·      Design is best suited for pipelines where manual operation is not convenient.

Disadvantages of Pneumatic Knife gate Valve

·      Low pressure

·      Less desirable for use in an application that requires cleanliness or sanitary conditions.

 

Available materials: WCB, WC6, WCC, LCB, LCC, Cast iron, Ductile Iron, SS316, SS304

Size: 2" to 80"

Class: 150 to 300

Nominal Pressure: PN6 to PN40

Operation: Handwheel, Electric and Pneumatic Actuated, Gear operated

Ends: Wafer, Lug, Flanged

 

https://www.specialityvalve.com/product-category/pneumatic-knife-gate-valve/