Diaphragm valve manufacturer in India

  Specialityvalve is one of the best Dual plate check valve manufacturer in India . A Dual Plate Check Valve, also known as a double disc check valve or a double door check valve, is a type of non-return valve used in piping systems to prevent the reverse flow of fluid. The valve consists of two semicircular plates hinged on a central pin that are designed to open and close in response to fluid flow. When fluid flows in the correct direction, the plates remain open, allowing the fluid to pass through. When fluid flow stops or reverses direction, the plates close automatically, sealing off the reverse flow. This helps prevent backflow and protects the system from damage or contamination. Specialityvalve is the top Dual Plate Check Valve Manufacturer in India   which provides the best quality products and services and is available in different sizes and designs.   Advantages of Dual Plate Check Valve: ·       Easy to operate ·       It can be installed horizontally or vertically.

  Specialityvalve is one of the leading Non Rising Stem Gate Valve Manufacturer in India . Non-rising stem gate valve is one type of gate valve with a flexible wedge as its on-off disc, which moving direction is perpendicular to the flow. Non-Rising Stem means outside stem and also referred to as the rotary stem gate valve or blind stem wedge gate valve. The stem will turn to open and close the gate, still the stem does not move up or down as it turns. Gate Valve is a valve that opens by lifting a barrier out of a path of a fluid. It is designed with a fully open or closed service. Operation of a gate valve is performed either clockwise to open or clockwise to close. The gate moves up or down on the threaded part of the stem. Gate valves should not be used for regulation or throttling of flow because accurate control is not possible.   Specialityvalve is the premium  Non Rising Stem Gate Valve Manufacturer in India   and has one of the popular products which are available in a varie

  Speciality v alve is the foremost Pneumatic Knife Gate Valve Manufacturer in India . The pneumatic knife gate valve is similar in design to gate valves. These valves cut through thick, porous media that may contain a high concentration of suspended solids which had caused problems with valves not seating completely and thus leaking. Knife gate valves are a specific type of isolation valve which is typically used for media that are not hazardous such as wastewater. The bore of a knife gate valve is fully smooth, so the use of a cleaning pig for maintenance is possible. A thin stainless-steel gate is raised and lowered into the bore by a spindle or rising screw and unlike other gate valves lifts outside the valve body when raised.   Gate Valve is a valve that opens by lifting a barrier out of a path of a fluid. It is designed with a fully open or closed service. Operation of a gate valve is performed either clockwise to open or clockwise to close. The gate moves up or down on the t